Adding Ping Ip Addresses; Modifying Ping Ip Addresses - JDS Uniphase DSAM-3500 User Manual

21128026 R001 DSAM Help User Guide.book Page 231 Thursday, February 5, 2009 2:02 PM
Adding Ping IP
Addresses
Modifying Ping IP
Addresses
DSAM Help User Guide
1 Press the Settings softkey.
2 Using the arrow keys, select Restore Defaults.
3 Press ENTER.
NOTE
The ten stored IP Addresses are not affected by the Restore
Defaults menu item.
To add an IP address
1 Press the Settings softkey.
2 Using the arrow keys, select Add IP.
3 Press ENTER.
4 Using the arrow keys and the alphanumeric keypad, type an IP
address.
5 Press the OK softkey.
NOTE
The last added IP address is placed on the top of the option list.
To modify an IP address
1 Using the arrow keys, select the IP Address option.
2 Press ENTER.
3 Using the arrow keys, select the IP address you want to edit.
4 Press ENTER.
5 Press the Settings softkey.
6 Using the arrow keys, select Modify IP.
7 Press ENTER.
8 Using the arrow keys and the alphanumeric keypad, edit the IP
address.
9 Press the OK softkey.
Rev. 001
Chapter 9 Measure Mode – Service Tab
Ethernet
231