Figure 85 Configure - Build A New Plan (Step 4); Figure 86 Configure - Build A New Plan (Searching) - JDS Uniphase DSAM-3500 User Manual

21128026 R001 DSAM Help User Guide.book Page 94 Thursday, February 5, 2009 2:02 PM
Chapter 5 Configuring the Meter
Configure – Channel Plan Tab
94
Figure 85 Configure – Build a New Plan (step 4)
13 Connect to cable plant.
14 Press the Start softkey.
Figure 86 Configure – Build a New Plan (searching)
The meter searches the cable system for active channels and
displays the following:
– the plan name you entered
– the template you used
– the stop frequency
– the number of channels found
DSAM Help User Guide Rev. 001