Table of Contents
Advertisement
21128026 R001 DSAM Help User Guide.book Page 41 Thursday, February 5, 2009 2:02 PM
RF Network
Parameters
DSAM Help User Guide
Figure 27 Configure – General Tab: RF Network
3 Using the arrow keys, select RF Network.
4 Press ENTER.
Figure 28 Configure – Configure RF Network
5 Using the arrow keys, select the parameter you want to edit.
6 Press ENTER.
7 Using the arrow keys and the alphanumeric keypad, edit the
value.
8 Press ENTER.
9 Press the OK softkey.
RF network parameters are the same as Ethernet parameters. Refer
to
"Ethernet Settings Parameters" on page
Rev. 001
Chapter 5 Configuring the Meter
Configure – General Tab
40.
41
Advertisement
Table of Contents
