Table of Contents
Advertisement
21128026 R001 DSAM Help User Guide.book Page 154 Thursday, February 5, 2009 2:02 PM
Chapter 8 Measure Mode – Basic Tab
Level
Understanding
Level Results
Digital Channel
Display
Measurement
Information Area
High Sensitivity
Indicator
154
NOTE
To save the results to a file, refer to
If you chose the wrong limit set before conducting the test, press
the Limits softkey and select a different limit set to view your test
results in relation to a different limit set without rerunning the test.
You can display level results in two ways: Digital or Analog.
Figure 143 Measure Mode – Level (digital channel)
This area displays information about the current channel. Information
that is displayed in this area includes:
– Overall pass/fail indicator
– Channel label
– Channel type (Single, TV, Dual, Digital, or DOCSIS)
– Channel number
– Test point compensation (if applicable)
– High sensitivity indicator (for some modes)
This icon is displayed if QAM Sensitivity is set to high on the Other
Settings configuration screen. (Refer to
on page
66.)
"Saving Results" on page
Measurement
Information Area
High Sensitivity
Indicator
Digital Performance
Interleaver Depth
Errored Seconds
"Other Settings Parameters"
DSAM Help User Guide
198.
Rev. 001
Advertisement
Table of Contents
