Figure 54 Configure - Fdr Settings; Table 24 Fdr Parameters - JDS Uniphase DSAM-3500 User Manual

21128026 R001 DSAM Help User Guide.book Page 64 Thursday, February 5, 2009 2:02 PM
Chapter 5 Configuring the Meter
Configure – Measure Tab
64
Figure 54 Configure – FDR Settings
5 Using the arrow keys, select the parameter you want to edit.
6 Press ENTER.
7 Using the arrow keys and the alphanumeric keypad, edit the
value.
OR
8 Using the arrow keys, select an option.
9 Press ENTER.
10 Press the OK softkey.

Table 24 FDR Parameters

Name Description
Resolution of The resolution of measurement determines the
Measurement number of data points, maximum distance of, and
distance resolution/accuracy of the measurement.
This setting affects the time per measurement
cycle, with LOW being fast (least accurate) and
ULTRA being slow (most accurate). Valid options
are:
– LOW (64pts)
– MEDIUM (128pts)
– HIGH (256pts)
– ULTRA (512pts)
The default option is LOW (64pts).
DSAM Help User Guide Rev. 001