Size Mismatch - Brother DCP-T310 User Manual

Error Message
Print Unable XX
Scan Unable XX

Size Mismatch

Tray not detected
Cause
More than one sheet of paper was placed
in the manual feed slot.
-OR-
Another sheet of paper was placed in the
manual feed slot before the LCD
displayed Where to Place the
Paper.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The machine has a mechanical problem.
-OR-
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
The machine has a mechanical problem.
The paper size setting does not match the
size of paper in the tray.
-OR-
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
The paper tray is not completely inserted. Slowly push the paper tray completely into
Action
DO NOT extend the paper tray when you
load A5 or smaller size paper. (for some
countries)
Do not put more than one sheet of paper
in the manual feed slot at any one time.
Wait until the LCD prompts you to load
another sheet of paper before you feed
the next sheet of paper in the manual feed
slot.
Clean the paper pick-up rollers.
See Related Information: Clean the Paper
Pick-up Rollers.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, disconnect the machine from
the power for several minutes, and then
reconnect it.
See Related Information: Printer Jam or
Paper Jam.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Disconnect the machine from the power
for several minutes, and then reconnect it.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
1. Check that the paper size you chose
on the machine's display matches the
size of the paper in the tray.
See Related Information: Change the
Paper Size and Paper Type.
2. Make sure you loaded the paper in a
Portrait position, by setting the paper
guides at the indicators for your paper
size.
See Related Information: Load Paper.
3. After you have checked the paper size
and the paper position, press c.
If you are printing from your computer,
make sure the paper size you chose in
the printer driver matches the size of
paper in the tray.
See Related Information: Print Settings
®
(Windows ) or Print Options (Mac).
the machine.
397