Brother DCP-T310 User Manual page 327
Hide thumbs
Also See for DCP-T310:
- Quick start manual ,
- Reference manual (28 pages) ,
- Product safety manual (24 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Push Method
Configure Your Wi-Fi Direct Network Using the One-Push Method
Related Models: DCP-T510W/DCP-T710W/MFC-T810W/MFC-T910DW
>> DCP-T510W/DCP-T710W/MFC-T810W
>> MFC-T910DW
DCP-T510W/DCP-T710W/MFC-T810W
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press OK to connect.
1. Press Menu.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [Push Button]. Press OK.
3. When [Wi-Fi Direct On?] appears, press a to select [On]. To cancel, press b.
4. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears. Press
OK on your Brother machine. This will start the Wi-Fi Direct setup.
5. Do one of the following:
•
When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine
directly.
•
When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Select the mobile device to which you want to connect and press OK. Search for
available devices again by selecting [Rescan].
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
MFC-T910DW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received.] will appear on the LCD. Press c to connect.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [Push Button]. Press OK.
3. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device.] appears. Press c on your Brother
machine. This will start the Wi-Fi Direct setup.
4. Do one of the following:
> Configure Your Wi-Fi Direct Network Using the One-
>
Use
321
Advertisement
Table of Contents
