Brother DCP-T310 User Manual page 348
Hide thumbs
Also See for DCP-T310:
- Quick start manual ,
- Reference manual (28 pages) ,
- Product safety manual (24 pages)
Table of Contents
Advertisement
Home >
Security
>
Lock the Machine Settings
Turn TX Lock On/Off
Related Models: MFC-T810W/MFC-T910DW
>> MFC-T810W
>> MFC-T910DW
MFC-T810W
1. Press Menu.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Security]. Press OK.
c. Select [TX Lock]. Press OK.
d. Select [Set TX Lock]. Press OK.
3. Enter the registered four-digit number for the password. Press OK.
The machine goes offline and the LCD displays [TX Lock Mode].
Turning off TX Lock:
a. Press Menu.
b. Enter the current four-digit password, and then press OK.
If you enter the wrong password, the LCD displays [Wrong Password] and stays offline. The
machine will stay in TX Lock Mode until the correct password is entered.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [TX Lock]. Press OK.
d. Select [Set TX Lock]. Press OK.
3. Enter the registered four-digit password. Press OK.
The machine goes offline and the LCD displays [TX Lock Mode].
Turning off TX Lock:
a. Press Settings.
b. Enter the current four-digit password, and then press OK.
If you enter the wrong password, the LCD displays [Wrong Password] and stays offline. The
machine will stay in TX Lock Mode until the correct password is entered.
Related Information
•
About Using TX Lock
>
About Using TX Lock
> Turn TX Lock On/Off
342
Advertisement
Table of Contents
