Brother DCP-T310 User Manual page 546

Hide thumbs Also See for DCP-T310:
Table of Contents

Advertisement

Level 1
Level 2
Wired LAN
TCP/IP
Ethernet
Wired Status
MAC Address
WLAN
TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code
WLAN Status
MAC Address
Wi-Fi Direct
Push Button
PIN Code
Manual
Level 3
Descriptions
WINS Server
Specify the IP address of the primary or
secondary WINS server.
DNS Server
Specify the IP address of the primary or
secondary DNS server.
APIPA
Set the machine to allocate the IP address from
the link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother Solutions
Center at support.brother.com.
-
Select the Ethernet link mode.
-
View the current wired status.
-
View the machine's MAC address.
BOOT Method
Select the Boot method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS
Select the WINS configuration mode.
Configuration
WINS Server
Specify the IP address of the primary or
secondary WINS server.
DNS Server
Specify the IP address of the primary or
secondary DNS server.
APIPA
Set the machine to allocate the IP address from
the link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother Solutions
Center at support.brother.com.
-
Configure your wireless network settings
manually.
-
Configure your wireless network settings using the
Brother installation disc.
-
Configure your wireless network settings using the
one-button push method.
-
Configure your wireless network settings using
WPS with a PIN.
Status
View the current wireless network status.
Signal
View the current wireless network signal strength.
SSID
View the current SSID.
Comm. Mode
View the current Communication mode.
-
View the machine's MAC address.
-
Configure your Wi-Fi Direct network settings using
the one-button push method.
-
Configure your Wi-Fi Direct network settings using
WPS with a PIN code.
-
Configure your Wi-Fi Direct network settings
manually.
540

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-t910dwDcp-t510wDcp-t710wMfc-t810w

Table of Contents