Brother DCP-T310 User Manual page 545

Level 1 Level 2
LCD Settings Dim Timer
Sleep Mode -
Auto Power Off -
Settings > [Fax] (MFC models)
Level 1 Level 2
Setup Receive Ring Delay
Receive Mode
F/T Ring Time
Fax Detect
Remote Codes
Auto Reduction
PC Fax Receive
Fax Rx Stamp
Report Setting XMIT Report
Journal Period
Print Document -
Remaining Jobs -
Miscellaneous TX Lock
Distinctive
(For some countries)
Settings > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Level 3 Descriptions
- Set how long the LCD backlight stays on after you go
back to your Home screen.
- Select how long the machine must be idle before it
goes into Sleep Mode.
- Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
Level 3 Descriptions
- Set the number of rings before the machine answers in Fax Only
or Fax/Tel mode.
- Select the Receive Mode that best suits your needs.
- Set the length of the pseudo/double-ring time in Fax/Tel mode.
- Receive fax messages automatically when you answer a call and
hear fax tones.
- Answer calls at an extension or external telephone and use
codes to turn the Remote Codes on or off. You can personalise
the codes.
- Reduce the size of incoming faxes.
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
- Print the received time and date on the top of received faxes.
- Select the initial setup for the Transmission Verification Report.
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
- Print received faxes stored in the machine's memory.
- Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
- Prohibit most functions except receiving faxes.
- Use with telephone company distinctive ringing service allows
you to have a voice number and fax number on the one phone
line.
Level 3 Descriptions
BOOT Method Select the Boot method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
Node Name Enter the Node name.
WINS Select the WINS configuration mode.
Configuration
539