Brother DCP-T310 User Manual page 547

Level 1 Level 2
Wi-Fi Direct Group Owner
Device
Information
Status
Information
I/F Enable
Web Connect Proxy Settings
Settings
Network I/F -
Network Reset -
Settings > [Print Reports]
Level 1
XMIT Verify
Address Book
Fax Journal
User Settings
Network Config
WLAN Report
Caller ID History
(Not available for Taiwan and
some countries)
Settings > [Machine Info.]
Level 1
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check
Page Counter
Level 3
-
Device Name
SSID
IP Address
Status
Signal
-
Proxy Connection
Address
Port
User Name
Password
-
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print a list of your Network settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 20 received faxes
and telephone calls.
Descriptions
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
Turn the Wi-Fi Direct connection on or off.
Change the Web connection settings.
Select the network connection type.
Restore all network settings back to the factory
settings.
Descriptions
Check your machine's serial number.
Check your machine's firmware version.
Update your machine to the latest firmware.
View firmware information on the Home screen.
Display the printed pages.
541