Brother DCP-T310 User Manual page 257
Hide thumbs
Also See for DCP-T310:
- Quick start manual ,
- Reference manual (28 pages) ,
- Product safety manual (24 pages)
Table of Contents
Advertisement
Home >
Fax
>
Telephone Services and External Devices
Remote Codes
> Change the Remote Codes
Change the Remote Codes
Related Models: MFC-T810W/MFC-T910DW
The preset Remote Activation Code is *51. The preset Remote Deactivation Code is #51. If you are always
disconnected when accessing your External TAD remotely, try changing the three-digit remote codes using the
numbers 0-9, *, #.
>> MFC-T810W
>> MFC-T910DW
MFC-T810W
1. Press Menu.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Remote Codes]. Press OK.
d. Select [On]. Press OK.
3. To change the Remote Activation Code, enter the new code. Press OK.
4. To change the Remote Deactivation Code, enter the new code. Press OK.
5. Press Stop/Exit.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Remote Codes]. Press OK.
d. Select [Remote Codes] again. Press OK.
e. Select [On]. Press OK.
3. Do one of the following:
•
To change the Remote Activation Code, press a or b to select [Act.Code] and then press OK. Enter the
new code. Press OK.
•
To change the Remote Deactivation Code, press a or b to select [Deact.Code] and then press OK.
Enter the new code. Press OK.
4. Press Stop/Exit.
Related Information
•
Use the Remote Codes
>
External and Extension Telephones
>
Use the
251
Advertisement
Table of Contents
