Size Mismatch - Brother MFC-L6750DW Online User's Manual

Hide thumbs Also See for MFC-L6750DW:
Table of Contents

Advertisement

Error Message
Scan Unable ##
Self-Diagnostic
Service Error ##
Size Error
Size Error 2-sided

Size Mismatch

Supplies
Drum End Soon
Supplies
Prepare New Toner
Cartridge.
Supplies
Replace Drum
Too Many Trays
Cause
The machine has a mechanical
problem.
The temperature of the fuser
unit does not rise to a specified
temperature within the specified
time.
The fuser unit is too hot.
Machine's firmware has a
problem.
The paper size defined in the
printer driver is not supported
by the defined tray.
The paper size specified in the
machine's paper size setting is
not available for automatic 2-
sided printing.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
The paper in the tray is not the
correct size.
The drum unit is near the end of
its life.
If the LCD displays this
message, you can still print.
The toner cartridge is near the
end of its life.
It is time to replace the drum
unit.
The drum unit counter was not
reset when a new drum was
installed.
The number of installed
Optional Trays exceeds the
maximum number.
Action
Press and hold
to turn off the machine,
and then turn it on again.
If the problem continues, contact Brother
Customer Service.
Contact Brother Customer Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
www.brother.ca/support
or to locate a Brother Authorized Service
Center, visit:
http://www.brother-usa.com/service
Press and hold
to turn off the machine, wait a
few seconds, and then turn it on again. Leave the
machine idle for 15 minutes with the power on.
Contact Brother Customer Service.
Contact Brother Customer Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
www.brother.ca/support
or to locate a Brother Authorized Service
Center, visit:
http://www.brother-usa.com/service
Choose a paper size supported by the defined
tray.
Press
(if required).
Load the correct size of paper in the tray and set
the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper sizes available for automatic 2-sided
printing are Letter, Legal, Mexico Legal, India
Legal and Folio.
Load the correct size of paper in the tray
indicated on the LCD and set the size of paper for
the tray.
Order a new drum unit before the LCD displays
Replace Drum.
Order a new toner cartridge now so a
replacement toner cartridge is available when the
LCD displays Replace Toner.
Replace the drum unit with a new one.
Reset the drum unit counter.
See the instructions included with the new drum
unit.
Reduce the number of Optional Trays.
(in Canada)
(in Canada)
520

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-l6900dw

Table of Contents