Brother DCP-T310 User Manual page 202
Hide thumbs
Also See for DCP-T310:
- Quick start manual ,
- Reference manual (28 pages) ,
- Product safety manual (24 pages)
Table of Contents
Advertisement
4. Press a or b to select [Add Number] and then press OK.
5. You can add numbers to the broadcast in the following ways:
•
Enter a number using the dial pad:
a. Press a or b to select [Add Number] and then press OK.
b. Enter a number using the dial pad and then press OK.
•
Select a number from the Address Book:
a. Press a or b to select [Add from Address book] and then press OK.
b. Press a or b to select [Alphabetical Order] or [Numerical Order] and then press OK.
c. Press a or b to select the Speed Dial name or number you want.
d. Press d or c to select the check box labelled with the Speed Dial name or number, and then press
OK.
•
Search a number in the Address Book:
a. Press a or b to select [Search in Address book] and then press OK.
b. Press the first letter of the name using the dial pad, and then press OK.
c. Press a or b to select the name, and then press OK.
d. Press OK again.
6. When finished, press a or b to select [Complete]. Press OK.
7. Press Mono Start.
8. Do one of the following:
•
If you are using the ADF, the machine starts scanning and sending the document.
•
If you are using the scanner glass, the machine starts scanning the first page.
When the LCD displays [Next page?], do one of the following:
-
Press c to scan another page. Place the next page on the scanner glass, and then press c. The
machine starts scanning the page.
Repeat this step for each additional page.
-
Press d to send a fax when finished scanning pages. The machine starts sending the document.
If the [Out of Memory] message appears, press Stop/Exit to cancel.
Related Information
•
Send a Fax
•
Cancel a Broadcast in Progress
•
Set up Groups for Broadcasting
•
Enter Text on Your Brother Machine
196
Advertisement
Table of Contents
