Brother DCP-T310 User Manual page 540

Menu > [Machine Info.]
Level 1
Serial No.
Version
Page Counter
Menu > [Initial Setup]
Level 1
Date&Time
Station ID
(MFC-T810W)
Tone/Pulse
(MFC-T810W)
(Available only for some
countries.)
Dial Tone
(MFC-T810W)
Phone Line Set
(MFC-T810W)
(Available only for some
countries.)
Compatibility
(MFC-T810W)
Reset
Local Language
Level 2
Date&Time
Auto Daylight
(MFC-T810W)
(Available only for some
countries.)
Daylight Save
(MFC-T810W)
(Available only for some
countries.)
-
-
-
-
-
Machine Reset
Network Reset
(DCP-T510W/
DCP-T710W/
MFC-T810W)
Address & Fax
(MFC-T810W)
All Settings
-
Descriptions
Check your machine's serial number.
Check your machine's firmware version.
Display the printed pages.
Descriptions
(MFC models)
Add the date and time on the screen and in the headings
of the faxes you send.
(DCP models)
Set the date and time on your machine.
Set the machine to change automatically for Daylight
Saving Time.
Change for Daylight Saving Time manually.
Enter your name and fax number so it appears on each
page you fax.
Select the dialling mode.
Shorten the dial tone detect pause.
Select the telephone line type.
Adjust the equalisation for transmission difficulties.
VoIP service providers offer fax support using various
standards. If you regularly experience fax transmission
errors, select Basic (for VoIP).
Restore all the machine's settings that you have changed,
such as Date and Time and Ring Delay.
Restore all network settings back to the factory settings.
Erase all stored phone numbers and fax settings.
Restore all the machine's settings back to the factory
settings.
Change your LCD language.
534