Brother DCP-T310 User Manual page 404

Error Message
MFC-T910DW
Error Message
A device is already
connected. Press
[OK].
Absorber NearFull
B&W Print Only
Check ink level, then
press [OK].
Comm. Error
Cause
Paper or a foreign object has prevented
the paper tray from being inserted
correctly.
Cause
Two mobile devices are already
connected to the Wi-Fi Direct network
when the Brother machine is the Group
Owner (G/O).
The ink absorber box is nearly full.
The amount of remaining ink in one or
more of the ink tanks (except black) is
low.
This error message may appear if the ink
dot counter is incorrect even if some ink
remains.
While this message appears on the LCD,
each operation works in the following way:
• Printing
If the media type is set to Plain Paper
in the Basic tab, and Greyscale is
selected in the Advanced tab of the
printer driver, you can use the machine
as a monochrome printer.
• Copying
If the paper type is set to Plain
Paper, you can make copies in
monochrome.
• Faxing
If the paper type is set to Plain
Paper, the machine will receive and
print the faxes in monochrome.
A certain amount of ink is consumed in
operations;
Look through the window of the ink tank to
confirm the actual amount of remaining
ink.
Poor telephone line quality caused a
communication error.
Action
Pull the paper tray out of the machine,
and remove the jammed paper or foreign
object. If you cannot find or remove the
jammed paper, see Related Information:
Printer Jam or Paper Jam.
Action
After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
See Related Information: Print the
Network Configuration Report.
The ink absorber box must be replaced
soon. Contact Brother customer service or
your local Brother dealer.
• The ink absorber box absorbs the
small amount of ink emitted during
print head cleaning.
Refill the ink tank.
When you refill the ink tank, fill the ink up
to the upper line, or fill with all of the ink in
the bottle if it does not exceed the upper
line.
A message may appear on the LCD to
verify whether the ink tanks were refilled.
Press c (Yes) to reset the ink dot counter
for the refilled colour. Press d (No) for the
non-refilled colours.
See Related Information: Refill the Ink
Tanks.
The machine may stop all print operations
and you may not be able to use the
machine until you refill the ink tank in the
following cases:
• If you unplug the machine.
• If you select the Slow Drying Paper
option on the machine or in the printer
driver.
If the remaining ink level is at or below the
lower line under the minimum fill mark,
refill the ink tank.
Send the fax again or connect the
machine to another telephone line. If the
problem continues, contact the telephone
company and ask them to check your
telephone line.
398