Copy An Id Card - Brother DCP-T310 User Manual

Home > Copy > Copy an ID Card

Copy an ID Card

Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original
card size.
• Make sure the paper size is set to A4 or Letter.
• You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
>> DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
>> MFC-T910DW
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
1. Place your identification card face down near the upper-left corner of the scanner glass.
a
a
d
b
a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. Scannable area
2. (MFC-T810W) Press
3. Enter the number of copies in one of the following ways:
• (DCP-T510W/DCP-T710W) Press a or b on the control panel.
• (MFC-T810W) Enter the number of copies using the dial pad.
• (DCP-T310) Press Number of Copies repeatedly.
4. Press Options or Copy / Scan Options and a or b to select [Layout(2in1 ID)]. Press OK.
5. Press a or b to select [2in1(ID)]. Press OK.
6. Press Mono Start or Colour Start.
The machine starts scanning one side of the identification card.
7. After the machine has scanned the first side, turn over the identification card and press Mono Start or
Colour Start to scan the other side.
c
(COPY).
183