Brother DCP-T310 User Manual page 45

When using envelopes, load the envelopes with the printing surface face up and the flap on the left as
shown in the illustration.
See Related Information: About Envelopes.
If you are having difficulty loading paper in the MP tray, push the release lever (1) towards the back of the
machine, and then load the paper.
6. Using both hands, gently adjust the MP tray paper guides to fit the paper.
• DO NOT press the paper guides too tightly against the paper. Doing this may cause the paper to fold
and jam.
• Place the paper in the centre of the MP tray between the paper guides. If the paper is not centred, pull it
out and insert it again at the centre position.
7. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
1
39