Brother DCP-T310 User Manual page 121

•
[Document Size]
•
[Remove Bkg Clr]
8. Press Mono Start or Colour Start.
[Scan Type] depends on the settings you have selected. Pressing Mono Start or Colour Start does not
change the settings.
MFC-T910DW
1. Load your document.
2. Press (SCAN).
3. Press a or b to select the [to PC] option, and then press OK.
4. Press a or b to select the [to E-mail] option, and then press OK.
5. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press OK.
6. Do one of the following:
• To change the settings, go to the next step.
• To use the default settings, press Mono Start or Colour Start.
[Scan Type] depends on the default settings. Pressing Mono Start or Colour Start does not allow you to
change the settings.
7. Press a or b to select the [Scan Settings] setting, and then press OK.
To use the [Scan Settings] option, a computer with either ControlCenter4 (Windows
iPrint&Scan (Mac) software installed must be connected to the machine.
8. Press a or b to select the [Set at Device] setting, and then press OK.
9. Select the scan settings you want to change, and then press OK.
Option
Scan Type
Resolution
File Type
Document Size
Brightness
Contrast
Remove Background Change the amount of background colour that is removed.
10. Press Mono Start or Colour Start.
[Scan Type] depends on the settings you have selected. Pressing Mono Start or Colour Start does not
allow you to change the settings.
Description
Select the scan type for your document.
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
®
) or Brother
115