Brother DCP-T310 User Manual page 451

Hide thumbs Also See for DCP-T310:
Table of Contents

Advertisement

Difficulties
There is a paper jam.
The paper jams when you use 2-
sided copy or 2-sided print.
Printing Received Faxes (MFC models)
Difficulties
Condensed print
Horizontal streaks
Top and bottom sentences are
cut off
Missing lines
Black lines when receiving.
Left and right margins are cut off
or a single page is printed on two
pages.
Related Information
If You Are Having Difficulty with Your Machine
Troubleshooting
Error and Maintenance Messages
Refill the Ink Tanks
Unprintable Area
Check the Print Quality
Change the Paper Size and Paper Type
Acceptable Paper and Other Print Media
Clean the Print Head from Your Brother Machine
Clean the Print Head from Your Computer (Windows
Clean the Print Head from Your Computer (Mac)
Check the Print Alignment from Your Brother Machine
Suggestions
See Related Information: Load Paper.
Make sure the Jam Clear Cover is closed correctly.
See Related Information: Printer Jam or Paper Jam.
Make sure the Base Pad in the paper tray is not dirty.
See Related Information: Clean the Base Pad.
See Related Information: Printer Jam or Paper Jam.
Make sure the paper guides are set to the correct paper size.
Use the jam prevention settings.
For copying
See Related Information: Change the Print Setting Options When Having Printing
Problems.
For printing
See Related Information: Prevent Smudged Printouts and Paper Jams
®
(Windows
) or Prevent Smudged Printouts and Paper Jams (Mac).
If paper jams occur frequently during 2-sided copying or 2-sided printing, the
paper feed rollers may be stained with ink. Clean the paper feed rollers.
See Related Information: Clean the Paper Feed Rollers.
Suggestions
This is usually caused by a poor telephone connection. Make a copy; if your copy
looks good, you probably had a bad connection, with static or interference on the
telephone line. Ask the other party to send the fax again.
The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your paper size setting may not be correct for the paper you are
using.
See Related Information: Change the Paper Size and Paper Type.
Turn on Auto Reduction.
See Related Information: Shrink Page Size of an Oversized Incoming Fax.
®
)
445

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-t910dwDcp-t510wDcp-t710wMfc-t810w

Table of Contents