Brother DCP-T310 User Manual page 480

Hide thumbs Also See for DCP-T310:

Table of Contents

Insert the nozzle of the ink bottle firmly so that the ink does not spill. Refill the ink tank by gently squeezing

the bottle as shown in the illustration.

Be careful not to fill the ink past the upper line above the maximum fill mark.

Be careful not to spill any ink when you refill the ink tank.

Refill with all of the ink in the bottle, if it does not exceed the upper line.

6. Point the nozzle upward so that the ink does not spill, and then remove the nozzle from the ink tank.

If any ink remains in the ink bottle, replace the cap and tip tightly and store the ink bottle upright on a level

surface in a cool, dark place.

7. Push down on the cap of the ink tank to close it tightly.

8. Repeat these steps for each ink tank you want to refill.

9. Close the ink tank cover.

Mfc-t910dw Dcp-t510w Dcp-t710w Mfc-t810w