Brother DCP-T310 User Manual page 539

Level 1
WLAN
Wi-Fi Direct
Network I/F
(MFC-T810W)
WLAN Enable
(DCP-T510W/
DCP-T710W)
Network Reset
Menu > [Print Reports]
Level 1
XMIT Verify
(MFC-T810W)
Address Book
(MFC-T810W)
Fax Journal
(MFC-T810W)
User Settings
Network Config
(DCP-T510W/DCP-T710W/MFC-T810W)
WLAN Report
(DCP-T510W/DCP-T710W/MFC-T810W)
Caller ID
(MFC-T810W)
(Not available for Taiwan and some
countries)
Level 2 Level 3
MAC Address -
Push Button -
PIN Code -
Manual -
Group Owner -
Device Info. Device Name View your machine's device name.
SSID
IP Address
Status Info. Status
Signal
Channel
Speed
I/F Enable -
- -
- -
- -
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print a list of your Network settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 20 received
faxes and telephone calls.
Descriptions
View the machine's MAC address.
Configure your Wi-Fi Direct network settings using the
one-button push method.
Configure your Wi-Fi Direct network settings using
WPS with a PIN code.
Configure your Wi-Fi Direct network settings manually.
Set your machine as the Group Owner.
View the Group Owner's SSID.
When the machine is not connected, the LCD displays
Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD
always indicates a strong signal.
Display the channel in use when the Wi-Fi Direct
network is active.
Display the connection speed when the Wi-Fi Direct
network is active.
Turn the Wi-Fi Direct connection on or off.
Select the network connection type.
Turn wireless network connection On or Off.
Restore all network settings back to the factory
settings.
533