Removing And Placing The Handwheel - Dürkopp Adler 195 Service Instructions Manual

Working basis

3.9 Removing and placing the handwheel

Fig. 18: Removing and placing the handwheel
(1) - Handwheel
(2) - Screw
To remove the handwheel:
1. Loosen the screws (2).
2. Remove the handwheel (1).
To place the handwheel:
1. Position the handwheel (1) such that it lines up with the toothed belt
2. Tighten the handwheel (1) using the screws (2).
Service Instructions 195 - 00.0 - 12/2017
①
cover (3).
②
③
(3) - Toothed belt cover
29