Table of Contents
Advertisement
Setting the left lower shaft bearing
Fig. 63: Setting the left lower shaft bearing (3)
(7) - Gage (gage 1,
8. Tighten the gage (8) on the throat plate support.
9. Loosen the screws (6).
10. Press the lower shaft bearing (9) up to the gage (8).
11. Re-tighten the screws (6).
12. Assemble and set the hook drive housing (4) and the lower shaft
13. Fill the hook drive housing (4) with DA 10 lubricating oil ( p. 125).
14. Check the oil level of the hook drive housing (4) ( p. 127).
Service Instructions 195 - 00.0 - 12/2017
⑧
p. 14)
( p. 66).
⑨
(8) - Lower shaft bearing
65
Advertisement
Table of Contents
