Working basis
Proper setting
The feed dog (2) does not touch the throat plate (1) with the maximum
permissible stitch length.
Disassembling the feed dog
To disassemble the feed dog:
1. Open the hook covers ( p. 30).
2. Disassemble the throat plate (1) ( p. 31).
3. Loosen the screw (3).
4. Remove the feed dog (2).
Assembling the feed dog
To assemble the feed dog:
1. Place the feed dog (2) onto the feed dog carrier.
2. Tighten the screw (3).
3. Assemble the throat plate ( p. 31).
4. Close the hook covers ( p. 30).
Order
Then check the following setting:
Service Instructions 195 - 00.0 - 12/2017
• Feed dog ( p. 80)
33