Table of Contents
Advertisement
Fig. 52: Setting the stroke adjusting range and the timing of the feeding foot stroke
movement (2)
(5) - Adjusting wheel (for the stroke height)
Fig. 53: Setting the stroke adjusting range and the timing of the feeding foot stroke
movement (3)
(6) - Stroke lever
(7) - Locking pin
Proper setting
When the stroke height at the adjusting wheel is set to 2 mm, the sewing
feet should be at the following height:
• Feeding foot: 2 mm
• Presser foot: 1.8 mm
Cover
• Remove the arm cover ( p. 20).
• Remove the head cover ( p. 22).
56
⑥
⑦
⑧
⑨
(8) - Sliding block
(9) - Eccentric
Service Instructions 195 - 00.0 - 12/2017
Sewing feet
⑤
Advertisement
Table of Contents
