Table of Contents
Advertisement
5. Screw the M4 screw into the face of the rocker bolt (8).
6. Loosen the threaded pin (7).
7. To slide the rocker bolt (8), push or pull the M4 screw:
8. Check the oil level ( p. 125).
70
Setting the needle evasive movement of the hook (ellipsis width)
• Ellipsis width increases: Slide the rocker bolt (8) to the left
• Ellipsis width decreases: Slide the rocker bolt (8) to the right
Service Instructions 195 - 00.0 - 12/2017
Advertisement
Table of Contents
