Table of Contents
Advertisement
Fig. 124: Lubricating the hook (2)
(1) - Screw plug
Checking the oil level
To measure the oil level, you will need the dipstick (3) included in the
accessory pack.
To check the oil level:
1. Keep the dipstick (3) ready.
2. Open the right hook cover ( p. 30).
3. Loosen the screw plug (1) on the filler opening.
4. Insert the dipstick (3) into the hook drive housing (2).
5. After a few seconds, pull the dipstick (3) out of the hook drive
128
①
NOTICE
Property damage from incorrect oil level!
Too little or too much oil can cause damage the machine.
Top off oil as described.
housing (2).
Maintenance
Service Instructions 195 - 00.0 - 12/2017
Advertisement
Table of Contents
