Table of Contents
Advertisement
To check the height of the locked sewing feet:
1. To lift the sewing feet, press and hold the pedal in position -1 or -2.
2. Press the locking button (1) on the head cover.
3. Release the pedal (position 0).
The sewing feet are now locked in place.
4. Measure the height of the locked sewing feet.
5. Adjust the height of the locked sewing feet if necessary.
Fig. 60: Setting the height of the locked sewing feet (2)
(2) - Screw
Cover
• Remove the head cover ( p. 22).
To set the height of the locked sewing feet:
1. Loosen the screws (2).
2. Change the position of the support plate (3).
3. Re-tighten the screws (2).
62
(3) - Support plate
Service Instructions 195 - 00.0 - 12/2017
Sewing foot lift
③
②
Advertisement
Table of Contents
