Table of Contents
Advertisement
Fig. 50: Setting the timing of the feeding foot feed movement (2)
(2) - Locking peg (locking peg 3,
(3) - Pusher eccentric
Cover
• Remove the arm cover ( p. 20).
To set the timing of the feeding foot feed movement with the locking peg:
1. Lock the machine in place at position A ( p. 16).
2. Loosen the threaded pins (4).
3. Insert the locking peg (2) into the mark-off hole of the pusher
4. Tighten the threaded pins (4).
To set the timing of the feeding foot feed movement without the locking
peg:
1. Lock the machine in place at position B ( p. 16).
2. Loosen the threaded pins (4).
3. Turn the pusher eccentric (3) on the arm shaft such that the feeding
54
②
③
④
eccentric (3) and move it to the vertical position.
foot remains at rest when the stitch adjustment lever (1) is pressed.
p. 14)
(4) - Threaded pin
Service Instructions 195 - 00.0 - 12/2017
Sewing feet
④
Advertisement
Table of Contents
