Adapting the thread guides to thicker needle/hook threads
22 Adapting the thread guides to thicker needle/hook
When using needle/hook threads thicker than 25/3 Nm, e.g. for airbag
seams, you need to adjust the thread guide.
Fig. 115: Adapting the thread guide to thicker needle/hook threads (1)
(1) - Tensioner element (needle thread)
To adjust the needle thread guide:
1. As shown above, insert the needle thread at the thread guide (2) on
Fig. 116: Adapting the thread guide to thicker needle/hook threads (2)
(3) - Tensioner element (hook thread)
To adjust the hook thread guide:
1. As shown, insert the hook thread at the thread guide (4) on the unwind-
Service Instructions 195 - 00.0 - 12/2017
threads
WARNING
Risk of injury!
Crushing, cutting and punctures are possible.
Only adapt the thread guides to thicker needle/
hook threads when the machine is switched off.
①
the unwinding bracket and do not guide it around the tensioner
element (1).
③
ing bracket and do not guide it around the tensioner element (3).
(2) - Thread guide (needle thread)
(4) - Thread guide (hook thread)
②
④
113