Operation During A Call - Fujitsu Arrows NX F-01J Instruction Manual

◆ Receiving a video call
<Example> When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
Press P/volume key to stop ringtone or vibration.
･
･
When receiving a call, "HD"/"HD+" is displayed at the
top of the screen.
2
→[ACCEPT VIDEO]
Accepting with voice call :
Rejecting a call : →[REJECT]
Rejecting a call and sending SMS :
SMS]→Select a message
Accepting with camera OFF :
Recording phone memo :
3
When a call is ended, [END CALL]
✔INFORMATION
･
When receiving a call while the Home screen is displayed or
application is activated, the incoming call screen is displayed
at the top of the screen. After you accept and end call, the
previous screen is displayed. Tap a caller's name or phone
number on the incoming call screen, the incoming call screen
(full-screen).
･
When you could not answer a call, notification icon (→P48)
appears on the status bar. Open the Notification panel (→
P50) to check missed calls, dial or send SMS.
･
Incoming voice calls are answered when the terminal is
simply held up to the ear. To use the terminal, set "Suguden
setting" (→P71) to ON. Note that this function is not available
for video call.
→[Accept voice]
→[Reject call with
→[Camera OFF response]
→[Phone memo]

Operation during a call

The following operations are possible in the screen during a
call.
･
You can adjust call volume with the volume key while
dialing/during a call.
a
b
c
d
e
Voice call screen
a Name or phone number
b Status of Voice clear
While Voice clear is on, it recognizes the ambient condition
and "Quiet", "Crowds", or "Noisy" is displayed.
c End call
d Show/hide the dial keypad
Send touch-tone signals (DTMF tones).
･
To input dialing number during a video call, tap
[Dialpad].
e Set Mute to ON/OFF
f Call time
67
f
g
k
l
h
i m
j
c
Video call screen
g
f
e
j
→
Calling