Fujitsu Arrows NX F-01J Instruction Manual page 96

■ TV/FM transmitter antenna
TV/FM transmitter antenna receives broadcasting signals
when you watch TV (Full Seg/1Seg).
･
Make sure to extend the TV/FM transmitter antenna to the
end when pulling it out.
･
To turn the TV/FM transmitter antenna around, hold the part
near the base of the TV/FM transmitter antenna. Do not put
an excessive force.
･
To stow the TV/FM transmitter antenna, hold the part near
the base of the TV/FM transmitter antenna and insert it until
it stops. Do not hold the top end to stow.
◆ Activating TV
1
From the Home screen,
TV watching screen appears.
･
When you activate the software for the first time, create
a channel list corresponding to the watching area.→P99
･
By default, Full Seg/1Seg watching mode is set to
[Auto]. On the TV watching screen, tap the TV watching
area (→P95)→Tap
When [Auto] is set, Full Seg/1Seg switches
automatically according to the signal condition.
You can check the watching mode on the operation area
at the top of the screen.
Ending TV : (Back)
✔INFORMATION
･
The minimum battery power to start or continue operating is
6% (while charging, you can activate or continue operating
regardless of the battery level).
･
It may take a time to acquire image data or broadcasted data
when you activate TV or change channels due to
characteristic of digital broadcasting.
･
Depending on the signal strength, video or audio may be
interrupted or stopped.
･
When the terminal returns to the Home screen or goes into
the sleep mode while receiving TV program, the sound of TV
keeps coming out. To end Background play of the TV, return
to the TV watching screen and tap
･
Video can be played back using the video correction engine
by marking [Video correction] when watching in 1Seg.→P123
･
Since TV content is prohibited from copying, screenshot or
Capture & Draw/Highlight & Copy is not available.
94
→[TV]
to switch the watching mode.
(Back).
Applications