Lock & Security - Fujitsu Arrows NX F-01J Instruction Manual

Lock & Security
Set up about lock.
1
From the Home screen,
& Security]
2
Set required items
Security unlock preference : Setting steps→P138
Change unlock pattern
Change Security code
*1
Change password : Change password.
*1
Register iris : Setting steps→P139
*1
Iris settings : Setting steps→P141
*1
Make pattern visible
visible when entering pattern for unlocking the screen
lock.
*1
Automatically lock
elapses after the terminal goes into the sleep mode if a
security unlock preference which requires authentication
on the lock screen is selected.
Power button instantly locks
screen immediately afterPis pressed. To cancel the
screen lock, authentication is needed.
Slide to activate camera
camera by flicking the lock screen from the right edge to
the left.
Lock screen message
the lock screen.
Display method for notification : Set whether to display all
notifications on the lock screen.
*1
Smart Lock : Setting steps→P141
→[Settings]→[Lock
*1
: Change unlock pattern.
*1
: Change Security code.
: Set whether to make pattern
: Lock the screen when the set time
*1
: Set whether to lock the
*2
: Set whether to activate
*1
: Enter a message displayed on
Personal note : Setting steps→P141
Make passwords visible : Set whether to display
passwords when entering security code/passwords.
Security : Set followings.
Storage type : Setting steps→P142
Trusted credentials : Setting steps→P142
Install certificates : Setting steps→P142
Clear credentials : Setting steps→P142
Hide recently used app : Setting steps→P142
Device administrators : Set whether to enable the device
administration function.
Unknown sources : Setting steps→P143
Set up SIM card lock
Trust agents : Manage trust agents such as Smart Lock.
Application pinning : Setting steps→P144
Apps with usage access : Manage the application that can
access to the application usage history on the terminal.
Encrypt phone : You can check that the system data saved
in the internal storage is encrypted.
･
You cannot change the setting of [Encrypt phone] on
the terminal.
*1 Displayed items vary depending on the security
unlock preference.
*2 This may not appear depending on the settings of
the Home application or security unlock preference.
*3 Not displayed if a docomo nano UIM card is not
inserted.
135
*3
: Setting steps→P143
Settings