Switching The Pocket Pc Off And On During Normal Use (Standby Mode); Switching Off The Pocket Pc To Save The Battery - Fujitsu LOOX T810 Manual

Operating the Pocket PC
Switching the Pocket PC off and on during nor-
mal use (Standby mode)
Standby mode
Switching the Pocket PC to Standby mode
End button
► From the Today screen, press the End button once.
The Pocket PC is switched to Standby mode.
If you have specified a switch-off time in the system settings, your Pocket PC will
automatically switch to Standby mode after this specified time.
There are two ways to switch on your Pocket PC:
Switch-off time
Switching on with the End button
End button
► Press the End button once.
► If the device lock is activated, press and hold the Enter button.
The Pocket PC is switched on.
Switching on with the application buttons
Application button
By default, you can also switch your Pocket PC on by briefly pressing one of the application buttons.
► Press any one of the application buttons once.
The applications assigned to the respective button appear on the screen.
You can prevent the Pocket-PC being started accidently if the application buttons
are pressed by selecting the appropriate setting in FSC KeyLock.
Detailed information about FSC KeyLock can be found in the help file on your Pocket PC.

Switching off the Pocket PC to save the battery

Switching off the Pocket PC Switching on the Pocket PC Complete Off Switching on
► In the Today screen, press and hold the End button.
The profile list is displayed.
► Select the Complete off profile.
The profile is activated. All programs are closed and the Pocket PC is completely switched
off. The power consumption of the Pocket PC is reduced to a minimum.
► To switch the Pocket PC back on again, press and hold the End button.
42 A26391-K182-Z120-1-7619, edition 2