Fujitsu Arrows NX F-01J Instruction Manual page 74

Open source licenses : Confirm open source licenses.
*1 Not supported to video calls.
*2 Not supported to VoLTE.
*3 Call is available when the Home screen is displayed
or the lock screen (only when [Touch/Swipe] is
selected for Security unlock preference) is
displayed.
✔INFORMATION
･
Alternatively, you can set call settings from the Home screen,
tap →[Settings]→[Useful tools]→[Voice call]→[Call
settings].
･
From the Home screen, tap
[Voice call]→[Voice adjust] to adjust listening volume for
making it easy to understand.
･
From the Home screen,
[Voice call]→Mark [Power button ends call] to enable ending
a call by pressing P. Note that you cannot end call by
pressing P in sleep mode.
･
Suguden cannot be used in the following cases.
- When using speakerphone
- When using earphones or headphones or using a Bluetooth
device that supports calling
- While making a call or switching calls when already taking
a call
- While lying down
- While running or going up and down stairs
- When covering up the display with a book-type smartphone
case etc.
･
If [スグ電設定 (Suguden setting)] is ON, and the terminal is
placed within a bag or pocket while on the incoming call
screen, movement that registers as an operating motion may
cause the call to be answered or disconnected.
→[Settings]→[Useful tools]→
→[Settings]→[Useful tools]→
･
The proximity sensor does not respond well to black objects.
(When answering a call) If hair is blocking the earpiece as you
bring the phone to your ear, the proximity sensor may have
trouble working and cause the call to not pick up. In this case,
place the earpiece directly against your ear.
(When disconnecting/rejecting a call) Turning the terminal
over on a black desk, etc. may cause the operation to fail
(cannot disconnect/reject). In this case, instead of placing the
terminal directly on the surface, raise the terminal 1 cm from
the desk, etc. as you flip it over to operate (disconnect/reject).
･
The Suguden (answer) function uses the proximity sensor as
one of the motion determinations. If you use the function with
the proximity sensor (→P30) soiled, you cannot answer
properly, and loud sound may emit near your ear, resulting in
a hearing loss. Clean the sensor regularly.
･
If a motion is performed when [Disconnect] for the Suguden
setting is set to ON, disconnection is activated in the
following cases, and the call is disconnected.
- While the other party is holding
- While Answering Machine is active (playing back a
greeting/recording a message)
･
The "Hide the name when receiving" function displays the
caller's name when receiving a call and Answering Machine
is active.
･
Shaking the terminal strongly is recognized as an operating
motion and may cause the call to be muted, rejected, or
disconnected.
･
When the terminal is turned off, the fast motion of putting the
terminal with its screen facing down may cause the operation
to fail (cannot disconnect). In this case, perform the action
slowly to operate (disconnect) the terminal.
72
Calling