Fujitsu Arrows NX F-01J Instruction Manual page 104

◆ Shooting still images
1
From the Home screen, [Camera]
A still image shooting screen appears.
2
Display an object on the shooting screen→
Shutter sound is heard and a still image is shot.
･
You can also shoot a still image by pressing the lower
part of the volume key.
■ Main operations on the still image shooting screen
Zooming : Pinch-in/Pinch-out the screen
･
Pinch-in/pinch-out to show a slide bar. You can zoom in/out
using the slide bar. Zoom function is not available for in-
camera.
Switch to in-camera/out-camera :
/
✔INFORMATION
･
Flick left to switch the shooting mode to video shooting.
On the shooting screen
◆ Continuous shooting
You can shoot continuously up to 100 images.
･
Continuous shooting mode is not available for shooting with
in-camera, shooting with HDR mode, flash or self timer
settings.
1
From the Home screen, [Camera]
2
[MENU]→[RapidPic]
Continuous shooting screen appears.
3
Display an object on the shooting screen→
Touch and hold
While pressing
kept. When you release the finger from
shooting ends.
･
You can also shoot images continuously by holding
down the lower part of the volume key.
■ Main operations on the continuous shooting screen
Zooming : Pinch-in/Pinch-out the screen
･
Pinch-in/pinch-out to show a slide bar. You can zoom in/out
using the slide bar.
✔INFORMATION
･
Continuous shooting stops when saving destination
becomes low on memory.
･
In continuous shooting mode, you can set the picture size
×
(3MP 2048 1536/Fit screen 1920
×
640 480), location information, save location, Touch shutter,
grid view, and Exposure/WB adjust.→P104
102
, continuous shooting and saving are
, continuous
×
1080/Mobile email
Applications