Fujitsu Arrows NX F-01J Instruction Manual page 130

PIN code displayed on the terminal to an access point
device.
✔INFORMATION
･
For some wireless LAN access points, AOSS™ connection
may not be established. If connection is failed, use WPS
connection or connect manually.
･
When security on the wireless LAN access point is set to WEP,
you cannot connect in WPS system.
◆ Wi-Fi Auto ON/OFF
Turn Wi-Fi to ON/OFF automatically using information from
the mobile network base station.
Set whether to turn on the Wi-Fi function when the Wi-Fi
network which has been connected is automatically detected,
or turn off the Wi-Fi function when the Wi-Fi network which
has not ever been connected is automatically detected.
1
From the Home screen,
& Bluetooth]→[Advanced Wi-Fi]→Mark/
Unmark [Wi-Fi Auto ON/OFF]
✔INFORMATION
･
The area where this function is set to ON and the terminal is
connected consecutively to the same access point for 2
minutes or more is detected as the connected Wi-Fi network.
･
This function does not work if Airplane mode or Wi-Fi
tethering is ON.
･
The terminal may not connect automatically with this
function if Wi-Fi information in the area is changed etc. In
such case, connect manually.
→[Settings]→[Wi-Fi
128
◆ Connecting other devices with Wi-Fi
Direct
Connect between Wi-Fi Direct devices without routing an
access point etc.
･
Set Wi-Fi to ON in advance.
･
To transfer data such as videos or still images using Wi-Fi
Direct, obtain an application compatible with data transfer
via Wi-Fi Direct from Play Store and install it.
1
From the Home screen,
& Bluetooth]→[Advanced Wi-Fi]→[Wi-Fi
Direct]
･
When a Wi-Fi Direct device does not appear, tap
[SEARCH FOR DEVICES].
2
Tap a detected Wi-Fi Direct device
Disconnecting Wi-Fi Direct device :
Direct device→[OK]
■ When other Wi-Fi Direct device requests connecting
to the terminal
When an invitation screen for connecting appears, tap
[ACCEPT].
→[Settings]→[Wi-Fi
Tap a connected Wi-Fi
Settings