Sleep Mode - Fujitsu Arrows NX F-01J Instruction Manual

◆ Sleep mode

When the sleep mode is set, the screen backlight turns off so
that you can avoid misoperations of the touch panel and lock
the screen. You can also reduce battery consumption.
P
1
✔INFORMATION
･
When no operation is performed in a certain period of time,
the screen automatically turns off according to the settings of
"Screen timeout" (→P124) and the terminal turns into sleep
mode.
･
When receiving a call in sleep mode, sleep mode is
deactivated.
◆ Unlocking screen lock
During sleep mode, P
1
2
On the screen, tap
The lock is canceled.
"ひつじのしつじくん
NTT DOCOMO
©
･
Depending on the settings of "SECURITY UNLOCK
SETTINGS" (→P138), authentication is required on the
lock screen after swiping.
･
Tap on the lock screen to activate the camera.
･
Tap on the lock screen to activate the しゃべってコン
シェル (Shabette concier).
✔INFORMATION
･
By default, numbers of missed calls and unread docomo
mails are shown even when lock screen is displayed.
･
By default, the lock screen goes into the sleep mode after
approximately 10 seconds.
51
®
(Butler Sheep)"
Before using the terminal