Data Communication/Airplane Mode - Fujitsu Arrows NX F-01J Instruction Manual

Ntt docomo
Table of Contents

Advertisement

◆ Wi-Fi sleep policy
Set whether to disconnect Wi-Fi when the screen of the
terminal turns off or while charging.
1
From the Home screen,
& Bluetooth]→[Advanced Wi-Fi]
2
[Wi-Fi sleep policy]→Select an item
◆ Advanced Wi-Fi settings
1
From the Home screen,
& Bluetooth]→[Advanced Wi-Fi]
2
Set required items
Wi-Fi Auto ON/OFF : Setting steps→P128
Screen/Music Cast : Setting steps→P169
Wi-Fi sleep policy : Setting steps→P130
Network notification : Set whether to notify when Wi-Fi
open network is available.
Not available when Wi-Fi is OFF.
Avoid poor connections : Set whether not to use Wi-Fi
network when it is unstable.
Wi-Fi frequency band : Set Wi-Fi frequency band.
Install certificates : Install certificates.
Wi-Fi Direct : Setting steps→P128
Wi-Fi optimization : Set whether to minimize battery
usage when Wi-Fi is ON.
MAC address : Display the MAC address.
IP address : Display the IP address.
auto-IP : Set whether to enable the auto-IP function.
Not available when Wi-Fi is ON.
→[Settings]→[Wi-Fi
→[Settings]→[Wi-Fi
130
Passpoint : Set whether to automatically connect the
available Passport access point when Wi-Fi is ON.
Data communication/Airplane
mode
◆ Data usage
You can enable Internet access via mobile network, set limit of
mobile data communications on graph or set alert when usage
exceeds the limit.
1
From the Home screen,
communication/Airplane mode]→[Data usage]
2
Set [Cellular data] to ON
Data usage managing screen appears and mobile data
communication volume (estimate) per period or per
application is displayed.
To restrict volume of data usage, set [Set mobile data
limit] to ON.
Tap [MENU]→[Restrict background data]→[OK] to
restrict data communication in background.
✔INFORMATION
Data communication usage displayed is an estimation. Actual
data communication usage can be checked at "My docomo".
If [Set mobile data limit] is set to ON, the notification screen
showing that data communication is paused is displayed
when data usage reaches the limit. Tap [RESUME] to resume
data communication.
→[Settings]→[Data
Settings

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents