Fujitsu Arrows NX F-01J Instruction Manual page 106

■ Adjust flicker
Reduce flicker noise or stripe pattern emerged under a
fluorescent lamp etc.
◆ Shooting settings for still image
Tap [MENU] displayed on the still image shooting screen to
change the following shooting settings.
･
Some items cannot be selected depending on the
combinations.
･
Some items cannot be set for the in-camera.
･
If the Camera is activated from other than the Home screen
or the application list screen, some settings are unavailable.
■ Camera Mode
Tap Still/RapidPic/Video/Panorama/QR code to select a camera
mode.
■ Picture Size
Select shooting size.
･
When you activate Camera from another application such as
phonebook, an image size may change temporarily to [Fit
×
screen 1920 1080].
■ Flash
Select Flash setting from auto flash (
auto-flash is set, when the camera determines that lighting is
insufficient, the flash automatically lights.
･
If flash ( ) is set, the icon is always displayed on the still
image shooting screen. If auto flash (
icon is displayed on the still image shooting screen when the
camera determines that lighting is insufficient. You can
change the settings by tapping the displayed icon.
)/flash ( )/off ( ). If
) or off ( ) is set, the
104
･
If "RapidPic" or "HDR mode" is set, the flash cannot be set.
Also depending on the night scene, it may not turn on.
■ HDR mode
Shoot 2 images in different exposure time (long exposure and
short exposure) and compose a still image that white out or
crushed blacks is reduced.
･
The real-time HDR is equipped with the terminal, so you can
check the status of composited HDR on the shooting screen
during shooting.
■ SelfTimer
Set to shoot a picture 2 seconds (
seconds ( ) after the shutter is pressed.
■ Display grid
Set to display auxiliary lines (grid) on the shooting screen as
an assistant for photo composition.
■ Others
Location : Set to add location information to shot images.
When location information is set to be added, icon of
obtaining location information (not obtained) appears, then
for completion of obtaining appears on the shooting
screen.
Save : Select data saving location (Terminal/SD card).
･
If the selected saving destination is low on memory, a
message appears and switch saving destination temporarily
(except during continuous shooting).
Touch shutter : Set to shoot with auto focus lock sound and
shutter sound by tapping an object when the object is focused
on.
･
In continuous mode, only one image is shot.
), 3 seconds ( ), or 5
for
Applications