Display & Wallpaper - Fujitsu Arrows NX F-01J Instruction Manual

Display & Wallpaper
Set screen brightness or auto-rotate screen.
1
From the Home screen,
[Display & Wallpaper]
2
Set required items
Wallpaper : Setting steps→P56
Lock screen wallpaper : Setting steps→P123
Homescreen selector : Setting steps→P54
Customize screen : Setting steps→P53
Brightness level : Setting steps→P123
Adaptive brightness : Set whether to adjust brightness
automatically according to the ambient brightness, based
on the [Brightness level] setting.
Auto-rotate screen : Set whether to rotate screen
according to the terminal orientation.
･
Even when you change the orientation of the terminal,
the screen may not change depending on the screen
displayed.
Touch and go display : Setting steps→P124
Touch and sleep : Set the terminal to sleep mode by
tapping [Turn off screen] on the lock screen or notification
panel.
Screen timeout : Setting steps→P124
Blue light cut mode : Set whether to cut down blue light
emitted from the screen.
→[Settings]→
123
Video correction : Set whether to correct image quality of
videos (1Seg, YouTube, etc.).
･
The image quality of videos recorded by the camera or
downloaded and saved to microSD card is corrected at
the time of playback.
･
Video correction may not be available depending on the
video.
Picture correction : Set whether to correct image quality of
still images.
Daydream : Setting steps→P124
◆ Setting wallpaper on the lock screen
Set wallpaper for lock screen.
1
From the Home screen,
[Display & Wallpaper]→[Lock screen
wallpaper]
2
[No setting (Home wallpaper)]/[Choose an
image]/[Wallpaper]
From here on, follow the on-screen instructions.
◆ Brightness
Set brightness of screen backlight.
1
From the Home screen,
[Display & Wallpaper]→[Brightness level]
2
Slide the slider to adjust brightness
→[Settings]→
→[Settings]→
Settings