Fujitsu Arrows NX F-01J Instruction Manual page 28

Ntt docomo
Table of Contents

Advertisement

◆ To ensure waterproofness/dustproofness
To prevent water or dust from entering the terminal, be sure
to observe the following points.
When attaching or removing a docomo nano UIM card or
microSD card, put your fingertip in the groove and pull open
the slot cap in the directions indicated by the arrows (a).
After use, press it in the direction indicated by the arrows
(b) and close the cap securely in the direction indicated by
the arrows (c) while tracing it with a finger along. Ensure
that there are no gaps between the slot cap and the body.
a
Groove
c
b
26
Make sure to firmly close the slot cap. Even a fine obstacle
(one hair, one grain of sand, tiny fiber, etc.) which is put
between contact surfaces may allow water or dust to enter.
Do not poke the stereo earphone jack, external connection
jack, mouthpiece/microphone, earpiece/speaker, back side
microphone, slot cap, or other components with a sharp
object.
Do not let the terminal fall. Doing so may scratch the
terminal, causing its waterproof/dustproof performance to
degrade.
The rubber seal in the slot cap plays an important part in
waterproof/dustproof property. Do not damage or remove
the rubber seals. Also, prevent dust from adhering to them.
It is recommended to replace the parts once every two
years to maintain the waterproof/dustproof performance,
regardless of whether an abnormality is present. Upon
request, DOCOMO will replace the parts for a fee. Take
your terminal to a sales outlet such as a DOCOMO-
specified repair office.
Contents/Precautions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents