◆ Shooting settings for video
Tap [MENU] displayed on the video shooting screen to change
the following shooting settings.
・
Some items cannot be selected depending on the
combinations.
・
Some items cannot be set for the in-camera.
■ Camera Mode
Tap Still/RapidPic/Video/Panorama/QR code to select a camera
mode.
■ Movie Size
Select shooting size.
■ Light
Set whether to automatically turn on the flash when recording
in a dark place.
■ HDR mode
Set to adjust contrasting of screen for video with crushed
blacks reduced even in backlight.
■ Steady Video
Set whether to use Steady Video.
・
Enabling the Steady Video function makes the shooting
range narrower.
■ Save
Select data saving location (Terminal/SD card).
・
If the selected saving destination is low on memory, a
message appears and switches saving destination
temporarily (recording stops during video recording).
■ Exposure/WB
Set whether to display the icons for exposure correction (
white balance adjustment (
◆ QR code reader
Scan QR code data and use it.
・
QR code cannot be scanned for some versions (type and
size).
・
Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
❖
Reading with QR code reader
・
Scan using the camera with the distance of approximately
12 cm or more from an object (QR code).
・
If the QR code is not scanned well, try to change the distance
between the QR code and camera, the angle or direction of
camera.
1
From the Home screen, [Camera]
2
[MENU]→[QR code]
The QR code shooting screen appears.
3
Display a QR code on the shooting screen→
Scan
A confirmation sound is played when scanning is
complete and the scanned data appears.
Scanning divided data :
One data item divided into multiple (up to 16) QR codes
can be scanned and be displayed as a combined data.
Continue reading if unscanned data exists.
106
) on the shooting screen.
Applications
)/