Nfc Communication - Fujitsu Arrows NX F-01J Instruction Manual

◆ Bluetooth Low Energy setting
Set notification for Bluetooth Low Energy device.
1
From the Home screen,
& Bluetooth]→[Advanced Bluetooth]→
[Bluetooth Low Energy]
2
Set required items
Alert Notification : Set whether to notify to compatible
devices of incoming calls, new email, etc.
Alert Notification Detail Setting : When Alert Notification
is ON, select items to notify (incoming call, docomo mail,
Email, Gmail, SMS, alarm, calendar).
Find Me Ringtone : Set whether to emit ringtone when
receiving notification from compatible devices.
Find Me Ringtone Settings : When Find Me Ringtone is
ON, select from the notification ringtone list.
Proximity : Set notification level for compatible devices
when connection is canceled.
･
Connecting compatible device again is needed for
reflecting this setting.
Time : Set whether to synchronize time with a Time-
compatible device.
･
Regardless of the setting, time on the terminal is
synchronized with paired Time-compatible device.
When the setting is on, time on a Time-compatible
device is synchronized with the terminal even if the time
on the terminal changes after pairing is complete.
✔INFORMATION
･
Find Me Ringtone in Bluetooth Low Energy setting sounds
regardless of the Manner mode and volume settings.
→[Settings]→[Wi-Fi
163

NFC communication

NFC is an abbreviation for Near Field Communication and a
short range wireless communication method of international
standard defined by ISO (International Organization for
Standardization). You can use a contactless IC card function,
Reader/Writer function, P2P function, etc.
You can send/receive data to/from another NFC compatible
device using NFC function.
･
For notes when holding over the other device, refer to
"Notes when holding over the other device".→P91
◆ Android Beam
Transfer data between the terminal and a Reader/Writer, P2P
equipped terminal.
･
To use Android Beam, set to allow data transfer beforehand.
･
When "Lock NFC/Osaifu-Keitai" is activated, Android Beam
cannot be used.
･
Android Beam cannot be used on some applications.
Available data varies by applications.
･
Data transfer is not guaranteed for all Reader/Writer, P2P
equipped terminals.
1
From the Home screen,
tools]→[NFC/Osaifu-Keitai Settings]
･
When a password setting screen appears, set a
password.
･
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
→[Settings]→[Useful
Data communication