Fujitsu Arrows NX F-01J Instruction Manual page 160

◆ Installing/Removing microSD card
･
Install/remove after unmounting microSD card (→P153) or
turning off the power.
■ Installing
a Open the slot cap hooking the groove with your fingertip→
P26
b Check if the display side of the terminal is faced down and
face down the metal contacts of microSD card, then insert
into the microSD card slot until it clicks
Slot cap
c Press firmly the slot cap of the terminal to close→P26
■ Removing
a Open the slot cap hooking the groove with your fingertip→
P26
b Push the microSD card lightly and release it, then pull the
microSD card straight out
c Press firmly the slot cap of the terminal to close→P26
✔INFORMATION
･
Note that the microSD card may jump out of the terminal
when removing it.
158
Slot cap
File management