INVT GD200-037G/045P-4 Operation Manual page 109

Goodrive200 inverters
Function
Name
code
UP
terminals
frequency
P08.45
increasing
integral
ratio
DOWN
terminals
P08.46 frequency
integral
ratio
Action
when the
P08.47 frequency
setting is
off
Detailed instruction of parameters
1:UP/DOWN terminals setting valid
LED tens: frequency control selection
0:Only valid when P00.06=0 or P00.07=0
1:All frequency means are valid
2:When the multi-step are priority, it is invalid to
the multi-step
LED hundreds: action selection when stop
0:Setting valid
1: Valid in the running, clear after stop
2: Valid in the running, clear after receiving the
stop commands
0.01~50.00Hz/s
0.01~50.00 Hz/s
0x000~0x111
LED ones: Action selection when power off.
0:Save when power off
1:Clear when power off
LED tens: Action selection when MODBUS set
frequency off
0:Save when power off
1:Clear when power off
LED hundreds:The action selection when other
108
Function codes
Default
Modify
value
0.50
○
Hz/s
0.50
○
Hz/s
○
0x000