Assembly Steps - Insportline IN 16443 User Manual

ASSEMBLY STEPS

Front stabilizer installation
•
End caps (C04) installation.
•
Place a Styrofoam to raise the main frame (A01) for easier installation.
•
Assemble the front stabilizer tube (A02) to front curve plate of the main frame (A01) using two
screws 3/8" (B26) And two washers (B09).
•
Tighten nuts with the hex tool with Phillips screwdriver that provided.
Rear stabilizer and guide rail installation
•
Two people are required for this step.
•
Undo one bolt M12 (B18) and one washer (B19) and one nylon nut M12 (B10) from the rear
guide rail (A05).
•
Assemble the rear stabilizer (A03) to rear U-shaped plate of the guide rail (A05) with one bolt
M12 (B18) and one washer (B19) and one nylon nut M12 (B10), which are undid from
previous step. Secure the guide rail using lock knob (B22). Lock it by turning the knob
clockwise.
•
Undo one bolt M12 (B17) and one washer (B19) and one nylon nut M12 (B10) from rear of the
main frame (A01).
•
Assemble the guide rail (A05) to the rear tube of the main frame (A01) with one bolt M12 (B17)
and one washer (B19) and one nylon nut M12 (B10) that are undid from previous step. Secure
the guide rail with the lock knob (B23). Lock it by turning it clockwise. Thereafter slide extra-
length cables into the opening of the main frame (A01).
•
Use provided the M10 Allen key and 19-mm hex tool to tighten them.
•
WARNING: Cables cannot be folded.
7