Assembly Steps - Insportline Yakapa User Manual

ASSEMBLY STEPS

Front stabilizer installation
•
Attach the front stabilizer (A02) to the main frame (A01) with 2x bolts (B26) and 2x washers
(B09).
Rear stabilizer and guide rail installation
•
Two people are required for this step.
•
Undo one bolt M12 (B18) and one washer (B19) and one nylon nut M12 (B10) from the rear
guide rail (A05).
•
Assemble the rear stabilizer (A03) to rear U-shaped plate of the guide rail (A05) with one bolt
M12 (B18) and one washer (B19) and one nylon nut M12 (B10), which are undid from
previous step. Secure the guide rail using lock knob (B22). Lock it by turning the knob
clockwise.
•
Undo one bolt M12 (B17) and one washer (B19) and one nylon nut M12 (B10) from rear of the
main frame (A01).
•
Assemble the guide rail (A05) to the rear tube of the main frame (A01) with one bolt M12 (B17)
and one washer (B19) and one nylon nut M12 (B10) that are undid from previous step. Secure
the guide rail with the lock knob (B23). Lock it by turning it clockwise.
•
Use provided the M10 Allen key and 19-mm hex tool to tighten them.
•
WARNING: Cables cannot be folded.
Upholstered seat installation
•
Assemble the upholstered seat (A04) to the guide rail (A05) using two PVC pads (C10) and
two screws M4 (B14).
12