Table of Contents
Advertisement
BLUETOOTH FUNCTION (OPTIONAL)
There is an optional Bluetooth module for connecting the computer with Fit Hi Way App. Find the code
at the computer back cover. Connect the Bluetooth with iOS or Android device. The display will be
turned off when the App is connected to the computer. The levels can be adjusted by the App. The
display will be turned on when the App is disconnected from the computer.
System requirements:
Support Android 4.3 or above with Bluetooth 3.0 and 4.0
Support iOS 9 or above with Bluetooth 3.0 and 4.0
App Installation:
For Android system search "Fit Hi Way" on the Googleplay.
For iOS system search "Fit Hi Way" on the Appstore.
QUICK KEY FUNCTION
Function
LEVEL UP
LEVEL DOWN
The quick key is only for the K (kayaking) mode. The gyro sensor can show the angel of the paddle
while exercising in the K mode. The quick key will enter the sleep mode if there is no program in
function within 5 minutes. Press any key to wake up the quick key. The quick key will enter the sleep
mode after 15 seconds of red-light flashing (low battery state). Please, use the USB cable for a cell
phone to charge the quick key. If the battery is charged, the red light will be on. The green light will
flash if the battery is charged.
ERROR MESSAGE
EEPROM ERROR: Code E-1
MOTOR ERROR: Code E-2
Press LEVEL UP button to increase the resistance level.
Press LEVEL DOWN button to decrease the resistance level.
EEPROM Memory IC malfunction.
Tension gear motor malfunction.
24
Advertisement
Table of Contents
